ABB OmniCore S Series Operating Manual page 102

6 Programming and testing
6.3.3 Handling of routines
Continued
Moving a routine
This section describes how to move a routine to another module.
Renaming a routine
This section describes how to rename a routine.
Deleting a routine
This section describes how to delete a routine from memory.
102
1 On the start screen, tap Code, and then select Code editor from the menu.
2 Tap View Routines on the Context menu for the module.
3 Tap Move Routine on the Context menu for the routine.
The Move Routine dialog is displayed.
xx1900000310
4 Select the Task and Module to which the routine should be moved. Then tap
Apply.
1 On the start screen, tap Code, and then select Code editor from the menu.
2 Tap View Routines on the Context menu for the module.
3 Tap Rename on the Context menu for the routine.
4 Type a new name for the routine in the Enter New Name field.
5 Tap Apply.
The selected routine is renamed.
1 On the start screen, tap Code, and then select Code editor from the menu.
2 Tap View Routines on the Context menu for the module.
3 Tap Delete on the Context menu for the routine.
The Delete Routine conformation window is displayed.
4 Tap OK.
The selected routine is deleted.
© Copyright 20192020 ABB. All rights reserved.
Operating manual - OmniCore
3HAC065036-001 Revision: E