Go To Position - ABB OmniCore S Series Operating Manual

7 Running in production

7.4.3 Go To position

7.4.3 Go To position
Moving the robot to a programmed position
It is possible to automatically move the robot to a programmed position.
Use the following procedure to move the robot automatically to a programmed
position:
202
DANGER
When moving the robot automatically, the robot arm may move without warning.
Make sure no personnel are in safeguarded space and that no objects are in the
way between the current position and the programmed position.
1 On the start screen, tap Jog.
2 Tap the Menu button and select Go To.
A list of programmed positions is displayed.
3 From the list select a programmed position to which you want to move the
robot.
Note
If you have many programmed positions you can use a filter to narrow
down the visible positions. For details, see
4 Press and hold the three-position enabling device and then tap and hold the
Go To button.
The robot is moved from the current position to the selected programmed
position.
Note
For collaborative robots, after selecting a programmed position, you need
to just press and hold the Go To button to move the robot.
© Copyright 20192020 ABB. All rights reserved.
Filtering data on page 48.
Operating manual - OmniCore
3HAC065036-001 Revision: E