Copying and pasting instructions or arguments
This section describes how to paste instructions or arguments.
Deleting an instruction
This section describes how to delete an instruction.
Commenting instruction rows
Use the following procedure to comment an instruction.
Operating manual - OmniCore
3HAC065036-001 Revision: E
6 Tap Apply.
The selected instruction (with the updated position values) is updated.
Note
The Update Position function is not available for array data position argument.
1 On the start screen, tap Code, and then select Modules from the menu.
2 Open the module.
3 Tap on the instruction that needs to be copied.
4 Tap Edit.
5 Tap Copy.
6 Tap and select the instruction after which you want to paste the copied
instruction.
7 Tap Paste.
The copied instruction is pasted.
1 On the start screen, tap Code, and then select Modules from the menu.
2 Open the module.
3 Tap on the instruction that needs to be deleted.
4 Tap Edit.
5 Tap Delete.
The selected instruction is deleted from the module.
1 On the start screen, tap Code, and then select Modules from the menu.
2 Open the module.
3 Tap on the instruction that you want to comment.
4 Tap Edit.
5 Tap Comment.
The selected instruction is commented and is skipped during the program
execution.
© Copyright 20192020 ABB. All rights reserved.
6 Programming and testing
6.3.4 Handling of instructions
Continued
105