Copying A Tool - ABB OmniCore S Series Operating Manual

6 Programming and testing

6.6.4 Copying a tool

6.6.4 Copying a tool
Procedure
Use the following procedure to create the copy of a tool.
122
1 On the start screen, tap Code, select RAPID Data from the menu, and tap
the tooldata data instance type.
The data of type tooldata are displayed.
Note
You can also create the copy of a tool data from Calibrate. For this, on the
start screen, tap Calibrate, select Tool from the menu, and continue with
the following steps.
2 Tap Copy on the context menu for the tooldata that you want to copy.
A confirmation window is displayed.
3 Tap OK.
A copy of the selected tooldata is created.
Note
The copied tooldata has the same values as the original, but the name is unique.
© Copyright 20192020 ABB. All rights reserved.
Operating manual - OmniCore
3HAC065036-001 Revision: E