Restore The System - ABB OmniCore S Series Operating Manual

10.5 Restore the system

When do I need this?
We recommend performing a restore:
During the restore, all system parameters are replaced and all the modules from
the backup directory are loaded.
The Home directory is copied back to the new system's HOME directory during
the restart.
Restore the system
Operating manual - OmniCore
3HAC065036-001 Revision: E
10 Install, update, restart, and other configuration
• If you suspect that the program file is corrupt.
• If any changes made to the instructions and/or parameters settings did not
prove successful, and you want to return to the previous settings.
1 On the start screen, tap Settings, and then Backup & Recovery.
2 On the Backup & Recovery menu, tap Restore.
The restore dialog is displayed.
xx1900000153
Browse for the location where the backup is located and select which of the
following options should be restored:
• Safety Settings
3 Tap Restore to restore the selected options.
The restore is performed, and the system is restarted.
© Copyright 20192020 ABB. All rights reserved.
10.5 Restore the system
225