Introduction To Omnicore; About This Section - ABB OmniCore S Series Operating Manual

1 Introduction to OmniCore

1.1 About this section

Overview
This section presents an overview of the FlexPendant, the OmniCore controller,
and RobotStudio.
A robot consists of a robot controller, the FlexPendant, RobotStudio, and one or
several manipulators or other mechanical units.
This manual describes a robot without options, not a robot system. However, in a
few places, the manual gives an overview of how options are used or applied. Most
options are described in detail in their respective application manual.
Operating manual - OmniCore
3HAC065036-001 Revision: E
© Copyright 20192020 ABB. All rights reserved.
1 Introduction to OmniCore
1.1 About this section
13