ABB OmniCore S Series Operating Manual page 95

Renaming a module
This section describes how to rename a module.
Changing type of module
This section describes how to change the type of module.
Deleting a module
This section describes how to delete a module from memory. If the module has
been saved to disk, it will not be erased from the disk.
Operating manual - OmniCore
3HAC065036-001 Revision: E
Use the suggested module name or enter a File Name.
4 Tap Save.
The module is saved in the selected location.
1 On the start screen, tap Code, and then select Modules from the menu.
2 Tap Change Declaration on the Context menu for the module.
The Change Declaration window is displayed.
xx1900000230
3 In the Module Name field type a new name for the module and then tap
Apply.
The module is renamed.
1 On the start screen, tap Code, and then select Modules from the menu.
2 Tap Change Declaration on the Context menu for the module.
The Change Declaration window is displayed.
3 In the Module Type list select a type and then tap Apply.
The module type is changed.
1 On the start screen, tap Code, and then select Modules from the menu.
2 Tap Delete on the Context menu for the module.
© Copyright 20192020 ABB. All rights reserved.
6 Programming and testing
6.3.2 Handling of modules
Continues on next page
Continued
95