ABB OmniCore S Series Operating Manual page 20

1 Introduction to OmniCore
1.3 The FlexPendant
Continued
Touch screen elements
The illustration shows important elements of the FlexPendant touch screen.
xx1800001181
A
B
C
20
Applications button From any window tap the Applications button to navigate
to the Home screen of FlexPendant. This is a toggle button.
Tapping this icon again displays the previously active
window.
The Home screen view is also the default view of the
FlexPendant during startup.
Status bar buttons Allows you to navigate to operator messages, event logs,
and QuickSet window.
Applications The applications that are required for operating the robot
system are available in the Home Screen. By default, the
Home screen displays all the applications available to you.
If you are in some other window, tap the Applications
button to view the Home screen.
© Copyright 20192020 ABB. All rights reserved.
Operating manual - OmniCore
3HAC065036-001 Revision: E