2.4.7 Logging on and off
Login procedure
Use the following procedure to log on to the controller, using the User Authorization
System (UAS). For more details about User Authorization System, see Operating
manual - RobotStudio.
xx2000000931
Logout procedure
You can logout from the controller using one of the following procedures:
Using the QuickSet menu
Operating manual - OmniCore
3HAC065036-001 Revision: E
1 Tap on the Username field.
The soft keyboard is displayed.
Note
If you select the Use credentials for Default User checkbox then no
password is required, and you are logged on automatically.
2 Type a valid username using the soft keyboard.
3 Tap on the Password field and type password for the selected user using
the soft keyboard.
4 Tap Log in.
The selected user is logged in.
Note
After a log off, the Log in to controller window is displayed.
1 Tap on the QuickSet button and select the Logout/Restart tab.
© Copyright 20192020 ABB. All rights reserved.
2 Navigating and handling the FlexPendant
2.4.7 Logging on and off
Continues on next page
51