I/O Devices - ABB OmniCore S Series Operating Manual

8.5 I/O devices

Managing I/O devices
You can manage I/O devices from the I/O Devices page. To manage an I/O device,
use the context menu that is displayed for the devices.
xx1800001859
Following are the actions that you can perform using the context sensitive menu:
Action
Activate/Deactivate
Bit Values
Signals
Actions
Configure
Firmware Update
Operating manual - OmniCore
3HAC065036-001 Revision: E
Output
Activates or deactivates the selected I/O device.
Displays the input and output bit values of the selected I/O
device.
Displays the signals associated with the selected I/O device.
Displays the MAC ID of the selected I/O device.
Note
Actions - Identify option is available only for the network type
EtherNet IP.
Allows you to configure the selected I/O device.
Note
The Configure option is available only for the network type
EtherNet IP.
Allows you to upgrade the firmware.
Note
Actions - Firmware option is available only for the network type
EtherNet IP.
© Copyright 20192020 ABB. All rights reserved.
8 Handling inputs and outputs, I/O
Continues on next page
8.5 I/O devices
213