Granting Access For Robotstudio - ABB OmniCore S Series Operating Manual

2 Navigating and handling the FlexPendant

2.4.6 Granting access for RobotStudio

2.4.6 Granting access for RobotStudio
About write access on the controller
The controller accepts only one user with write access at a time. Users in
RobotStudio can request write access to the system. If the system is running in
manual mode, the request can be accepted or rejected on the FlexPendant.
Granting access for a RobotStudio user
The following procedure describes how to grant access for a RobotStudio user.
50
1 When a user in RobotStudio requests access, a message is displayed on
the FlexPendant. Decide whether to grant or reject the access.
2 If you want to grant access, tap Grant. The user holds write access until he
disconnects or until you reject the access.
If you want to reject access, tap Deny.
Note
If you have granted the access and want to revoke it, tap Deny.
© Copyright 20192020 ABB. All rights reserved.
Operating manual - OmniCore
3HAC065036-001 Revision: E