Audio Crosspoint Menu - Lightware UBEX-PRO20-HDMI-F110 User Manual

 
     
6. Lightware Device Controller (LDC) 6. Lightware Device Controller (LDC)
6.6. Audio Crosspoint Menu
1
2
3
4
5
Crosspoint menu - Audio layer for Extender mode
The Concept
The Crosspoint menu displays the UBEX Transmitter (left side) and the Receiver (in the middle) connected to
each other. Clicking on a port or feature panel the Properties of the selected item appear on the right side. The
selected port or feature panel is highlighted with orange.
Legend of the Audio Crosspoint Menu
1 Audio follows ▪ Enabled: the audio stream follows the video stream when the video
video switcher
crosspoint is changed. Beside of this the audio streams can be switched
separately from the video streams on the Audio crosspoint tab.
▪ Disabled: switching of a video stream does not effect the audio
crosspoint state.
TX - HDMI in 1 Section of the HDMI in 1 / out 1 ports of the UBEX transmitter. Available panels:
2
and local HDMI
▪ HDMI in 1: the audio port properties of the HDMI in 1 port.
out 1 ports
▪ HDMI out 1: the port properties of the local HDMI out 1 port.
▪ Stream 1: the properties of the Stream 1 of the transmitter.
3 TX - HDMI in 2 Section of the HDMI in 2 / out 2 ports of the UBEX transmitter. Available panels:
and local HDMI
▪ HDMI in 2: the audio port properties of the HDMI in 2 port.
out 2 ports
▪ HDMI out 2: the port properties of the local HDMI out 2 port.
▪ Stream 2: the properties of the Stream 2 of the transmitter.
UBEX series – Extender Application Mode – User's Manual UBEX series – Extender Application Mode – User's Manual
6
7
8
9
#audio
Applied F-series endpoint firmware package: v1.4.1 | Applied R-series endpoint firmware package: v1.4.1 | LDC software: v1.34.0b2
TX - Analog audio
4
input port
5 TX - Analog audio
output port
q
RX - HDMI out 1
6
port
7 RX - HDMI out 2
port
8 RX - Analog audio
output port
9 RX - Analog audio
input port
q Properties
window

DIFFERENCE: Only the UBEX-PRO20-HDMI-F110 model is built with analog audio input and output ports.
Section of the analog audio input port of the UBEX transmitter. Available
panels:
▪ Analog in: the port properties of the analog audio input port of the
transmitter. See the details in the Analog Audio Input Port
Stream 3: the properties of the Stream 3 of the transmitter.
▪
Section of the analog audio output port of the UBEX transmitter. Available
panels:
▪ Analog out: the port properties of the analog audio output port of the
transmitter. See the details in the Analog Audio Output Port
▪ Stream switcher: select the source signal for the output port. See the
details in the Stream Switcher section.
Section of the HDMI out 1 port of the UBEX receiver. Available panels:
▪ Stream switcher: select the source signal for the output port. See the
details in the Stream Switcher section.
HDMI out 1: the port properties of the HDMI out 1 port.
▪
Section of the HDMI out 2 port of the UBEX receiver. Available panels:
▪ Stream switcher: select the source signal for the output port. See the
details in the Stream Switcher section.
▪ HDMI out 2: the port properties of the HDMI out 2 port.
Section of the analog audio output port of the UBEX receiver. Available panels:
▪ Stream switcher: select the source signal for the output port. See the
details in the Stream Switcher section.
▪ Analog out: the port properties of the analog audio output port of the
receiver. See the details in the Analog Audio Output Port
Section of the analog audio input port of the UBEX receiver. Available panels:
▪ Stream 1: the properties of the Stream 1 of the receiver.
Analog in: the port properties of the analog audio input port of the
▪
receiver. See the details in the Analog Audio Input Port
The properties, available settings, and status information of the selected panel
are displayed in this section. Clicking on the
section opens in new window.
63 63
section.
section.
section.
section.
icon the properties