Running The Ldc; Establishing The Connection - Lightware UBEX-PRO20-HDMI-F110 User Manual

 
     
6. Lightware Device Controller (LDC) 6. Lightware Device Controller (LDC)
6.2. Running the LDC
The common way to start the software is double-click on the LDC icon. But the LDC can be run by command
line parameters as follows:
Run window in the Windows 7 operating system
Connecting to a Device with Static IP Address
Format: LightwareDeviceController -i <IP_address>:<port>
Example: LightwareDeviceController -i 192.168.0.20:6107
The LDC is connected to a device with the indicated static IP address directly; the Device Discovery window is
not displayed. When the port number is not set, the default port is used: 10001 (LW2 protocol - not supported
by the UBEX extenders). For LW3 devices use the 6107 port number.
6.3. Establishing the Connection
Step 1. Connect the device to a computer via Ethernet.
Step 2. Run the controller software; device discovery window appears automatically.
Change IP Address
To modify IP address settings quickly it is not necessary to enter the
device's settings/network menu, you can set them by clicking the pencil
icon next to the IP address.
You can see the new settings only in this window.
#network #ipaddress #dhcp #mac
UBEX series – Extender Application Mode – User's Manual UBEX series – Extender Application Mode – User's Manual
Applied F-series endpoint firmware package: v1.4.1 | Applied R-series endpoint firmware package: v1.4.1 | LDC software: v1.34.0b2
Identifying the Device
Clicking on the icon makes the four front panel LEDs blink in green for 10 seconds. The feature helps to
identify the device itself in the rack shelf. #identifyme
Device Discovery Window
Select the device in the Device discovery window and click on the green Connect button.
Device discovery window in LDC
Favorite Devices (fix IP)
Clicking on the grey star icon next to of the discovered devices the most used units can be saved to the
Favorite devices.

ATTENTION! Only the devices set with static (fix) IP address can be saved as favorite device.
Once the device is set as favorite, the star icon will be highlighted with yellow and the device will be displayed
between the Favorite Devices (fix IP) window section.
56 56