Table of Contents
Advertisement
5.SoftwareControl-LightwareDeviceController
5.3. Establishing the Connection
Step 1. ConnectthedevicetoacomputerviaEthernetorRS-232.
Step 2. Runthecontrollersoftware;devicediscoverywindowappearsautomatically.Therearethreetabsfor
thedifferenttypeofinterfaces;EthernetandSerialareavailableforTPS-TX200devices.
Step 3. SelectthedesiredunitandclickonthegreenConnectbutton(orjustdouble-clickonthedevice.
Device discovery window in LDC
Changing the IP Address
TomodifyIPaddresssettingsquicklyitisnotnecessarytoenter
thedevice'ssettings/networkmenu,youcansetthembyclicking
thepenciliconbesidetheIPaddress.
Youcanseethenewsettingsonlyinthiswindow.
HDMI-TPS-TX200series–User'sManual
5.3.1. Ethernet Tab
The Ethernet tab consists of two lists. All deviceslistcontainsallLightwaredeviceswhichareavailableinthe
connectednetwork(inthe255.255.0.0subnet).However,thereisnoneedtobrowsealltheavailabledevices
as you can expand the list of Favorite devices with anyLightwaredevicethatisconnectedviaEthernetbyany
ofthefollowingways:
▪
▪
▪
Add New Favorite Device
PresstheAdd button;intheappearingwindowyoucanenter
the IP address. The hostname of the desired device can be used
insteadifitissupported.Thatallowssettingauniquename
to identify the device in a network. If the host name is saved
inthiswindowandtheIPaddressischanging,thedevicewill
be still available and connectible.
ATTENTION!
workwhenthetargetdeviceisaccessedoverVPN.
See more information about the host name property in the
SettingtheHostName
Import/Export the List of Favorite Devices
Thelistoffavoritedevicescanbeexported/importedbythededicatedbuttons(savedas*.JSONfile).The
list can be imported later (in another computer, too), but please note that the current list will be overwritten
by the imported list.
Changing the IP Address
TomodifytheIPaddresssettingsquicklyitisnotnecessarytoenterthe
device'ssettings/networkmenu,youcansetthembyclickingthepencil
iconbesidetheIPaddress.
Youcanseethenewsettingsonlyinthiswindow.Thedeviceneedssome
secondstoapplythenewsettings.
Identifying the Device
ClickingontheiconresultstheblinkingofthestatusLEDsfor10seconds.Thefeaturehelpstofindthe
device itself physically.
Appliedfirmwarepackage:v1.3.2b3 | LDCsoftware:v2.5.7b2
Mark the desired device with the
symbol in the All Devices list,
PresstheAddbuttonandaddthedeviceintheappearingwindow,or
Import the list of favorite devices that was exported previously.
Thehostnameconnection-featuredoesnot
section.
#identifyme
37
VIDEO
AUDIO
VIDEO
AUDIO
VIDEO
AUDIO
VIDEO
AUDIO
HDCP
Autoselect
AUDIO
DP IN
HDMI IN
HDMI IN
DVI-D IN
5
AUDIO IN
Advertisement
Table of Contents
