Query The Resolution Of The Stream; Query The Bandwidth Of The Stream; Query The Bandwidth Limitation Indicator; Query The Link Aggregation Status - Lightware UBEX-PRO20-HDMI-F110 User Manual

 
     
7. Programmers' Reference 7. Programmers' Reference
7.9.6. Query the Resolution of the Stream
Command and Response
ç GET•/MEDIA/VIDEO/<source|destination>.Resolution
pr•/MEDIA/VIDEO/<source|destination>.Resolution=<resolution>
æ
Example
ç GET /MEDIA/VIDEO/S1.Resolution
æ pr /MEDIA/VIDEO/S1.Resolution=3840x2160p60
7.9.7. Query the Bandwidth of the Stream
Bandwidth property provides the required Ethernet bandwidth of the stream.
Command and Response
ç GET•/MEDIA/VIDEO/<source|destination>.Bandwidth
pr•/MEDIA/VIDEO/<source|destination>.Bandwidth=<bandwidth>
æ
Example
ç GET /MEDIA/VIDEO/S1.Bandwidth
æ pr /MEDIA/VIDEO/S1.Bandwidth=13.15
The bandwidth is in Gigabit/sec.
7.9.8. Query the Bandwidth Limitation Indicator
BandwidthLimitExceeded property indicates the signal bandwidth limit has been exceeded and the stream
is disabled.
Command and Response
ç GET•/MEDIA/VIDEO/<source|destination>.BandwidthLimitExceeded
pr•/MEDIA/VIDEO/<source|destination>.BandwidthLimitExceeded=<logical_value>
æ
Parameters
Identifier Parameter description
Bandwidth limit has
<logical_value>
been exceeded or not.
Example
ç GET /MEDIA/VIDEO/S1.BandwidthLimitExceeded
æ pr /MEDIA/VIDEO/S1.BandwidthLimitExceeded=false
UBEX series – Extender Application Mode – User's Manual UBEX series – Extender Application Mode – User's Manual
Value Explanation
The bandwidth of the Ethernet connection
true
does NOT allow to send/receive the stream.
The bandwidth of the Ethernet connection
false
allows to send/receive the stream.
Applied F-series endpoint firmware package: v1.4.1 | Applied R-series endpoint firmware package: v1.4.1 | LDC software: v1.34.0b2
7.9.9. Query the Link Aggregation Status
Querying of the recent status of the link aggregation between the SFP+ links.
Command and Response
ç GET•/SYS/MB/UPLINK/<link>.LinkState
pr•/SYS/MB/UPLINK/<link>.LinkState=<link_state>
æ
Parameters
Identifier Parameter description
Status of the link
<link_state> aggregation between
the SFP+ links
Example
ç GET /SYS/MB/UPLINK/LINK1.LinkState
æ pr /SYS/MB/UPLINK/LINK1.LinkState=Up
7.10. SFP+ Module Information
7.10.1. Query the Vendor
Querying of the vendor of the installed SFP+ module.
Command and Response
ç GET•/SYS/MB/UPLINK/<link>/SFP.VendorName
pr•/SYS/MB/UPLINK/<link>/SFP.VendorName=<vendor_name>
æ
Example
ç GET /SYS/MB/UPLINK/LINK1/SFP.VendorName
æ pr /SYS/MB/UPLINK/LINK1/SFP.VendorName=FINISAR CORP.
#sfp
Value Explanation
The transmit and receive path of
Down the 10 Gbps Ethernet link is not in
operation.
The SFP+ link is waiting for the
WaitingForAggregation
aggregation.
The transmit and receive path of the
Up 10 Gbps Ethernet link on both local
and remote side is fully operational.
97 97