Identify The Device; Query The Operation Mode; Set The Operation Mode - Lightware UBEX-PRO20-HDMI-F110 User Manual

 
     
7. Programmers' Reference 7. Programmers' Reference
7.3.6. Identify the Device
Calling the method results the blinking of the front panel status LEDs for 10 seconds. This feature can be
used to help to identify the device itself in the rack shelf.
Command and Response #identifyme
ç CALL•/MANAGEMENT/UI:identifyMe()
æ mO•/MANAGEMENT/UI:identifyMe
Example
ç CALL /MANAGEMENT/UI:identifyMe()
æ mO /MANAGEMENT/UI:identifyMe
7.3.7. Query the Operation Mode
Command and Response
ç GET•/SYS/MB.OperationMode
pr•/SYS/MB.OperationMode=<operation_mode>
æ
Parameters
Identifier Parameter description
The operation mode of
<operation_mode>
the endpoint device
Example
ç GET /SYS/MB.OperationMode
æ pr /SYS/MB.OperationMode=Transceiver
#operationmode #transmitter #receiver #transceiver #tx #rx #trx
UBEX series – Extender Application Mode – User's Manual UBEX series – Extender Application Mode – User's Manual
Value Explanation
The endpoint device operates as
Transmitter a Transmitter. See the details in the
Transmitter Mode section.
The endpoint device operates as
Receiver a Receiver. See the details in the
Receiver Mode section.
The endpoint device operates as
Transceiver a Transceiver. See the details in the
Transceiver Mode section.
Applied F-series endpoint firmware package: v1.4.1 | Applied R-series endpoint firmware package: v1.4.1 | LDC software: v1.34.0b2
7.3.8. Set the Operation Mode
ATTENTION!
This operation always requires rebooting the device.
The operation mode (transmitter, receiver, or transceiver) of the device can be changed based on the required
application.
Command and Response
CALL•/SYS/MB.setOperationModeAndReset=<operation_mode>
ç
mO•/SYS/MB.setOperationModeAndReset=<operation_mode>
æ
Parameters
Identifier Parameter description
The operation mode of
<operation_mode>
the endpoint device
Example
ç CALL /SYS/MB.setOperationModeAndReset=Transmitter
æ mO /SYS/MB.setOperationModeAndReset=Transmitter
Value Explanation
The endpoint device is set to
Transmitter operation mode. See
Transmitter
the details in the Transmitter Mode
section.
The endpoint device is set to Receiver
Receiver operation mode. See the details in
the Receiver Mode section.
The endpoint device is set to
Transceiver operation mode. See
Transceiver
the details in the Transceiver Mode
section.
77 77