Color Space Converter Setting; Query The Timing Mode; Hdcp Setting (Input Port); Hdcp Setting (Output Port) - Lightware UBEX-PRO20-HDMI-F110 User Manual

 
     
7. Programmers' Reference 7. Programmers' Reference
7.4.10. Color Space Converter Setting
Command and Response #csc #colorspace
SET•/MEDIA/VIDEO/<source>.ColorSpaceSetting=<color_space>
ç
pw•/MEDIA/VIDEO/<source>.ColorSpaceSetting=<color_space>
æ
Parameters
Identifier Parameter description
<color_space> Color space setting
Example
ç SET /MEDIA/VIDEO/S2.ColorSpaceSetting=YCbCr 4:4:4
æ pw /MEDIA/VIDEO/S2.ColorSpaceSetting=YCbCr 4:4:4
7.4.11. Query the Timing Mode
The query returns with the current status of the timing mode. See more details about it in the
section.

DIFFERENCE: The timing mode can be changed in the output ports of the receiver/transceiver only.
Command and Response #timingmode #freerun #sourcelocked
ç GET•/MEDIA/VIDEO/<source>.TimingMode
pr•/MEDIA/VIDEO/<source>.TimingMode=<timing_mode>
æ
Parameters
The <timing_mode> can be Freerun or SourceLocked.
Example
ç GET /MEDIA/VIDEO/S1.TimingMode
æ pr /MEDIA/VIDEO/S1.TimingMode=SourceLocked
UBEX series – Extender Application Mode – User's Manual UBEX series – Extender Application Mode – User's Manual
Value Explanation
Pass-through mode - the original color
Pass space of the stream is transmitted to the
sink device.
RGB Forced RGB color space.
YCbCr 4:4:4 Forced YCbCr 4:4:4 color space.
YCbCr 4:2:2 Forced YCbCr 4:2:2 color space.
Timing Modes
Applied F-series endpoint firmware package: v1.4.1 | Applied R-series endpoint firmware package: v1.4.1 | LDC software: v1.34.0b2
7.4.12. HDCP Setting (Input Port)
HDCP capability can be enabled/disabled on the input ports, thus, non-encrypted content can be enforced
so that non-HDCP compliant displays can be used. See more information in the
Command and Response
SET•/MEDIA/VIDEO/<in>.HdcpEnable=<logical_value>
ç
pw•/MEDIA/VIDEO/<in>.HdcpEnable=<logical_value>
æ
Parameters
The <logical_value> can be set to true or false.
Example
ç SET /MEDIA/VIDEO/I2.HdcpEnable=true
æ pw /MEDIA/VIDEO/I2.HdcpEnable=true
7.4.13. HDCP Setting (Output Port)
HDCP capability can be set to Auto/Always on the output ports, thus, non-encrypted content can be
transmitted to a non-HDCP compliant display. See more information in the
Command and Response
SET•/MEDIA/VIDEO/<out>.HdcpMode=<HDCP_mode>
ç
pw•/MEDIA/VIDEO/<out>.HdcpMode=<HDCP_mode>
æ
Parameters
The <HDCP_mode> can be set to Auto or Always.
Example
ç SET /MEDIA/VIDEO/O1.HdcpMode=Always
æ pw /MEDIA/VIDEO/O1.HdcpMode=Always
#hdcp
83 83
HDCP Management section.
HDCP Management section.