Unlocking An Input Port; Muting An Output Port; Unmuting Output; Locking An Output Port - Lightware HDMI-TPS-TX226 User Manual

   
7.LW3Programmer'sReference
7.6.13. Unlocking an Input Port
Command and Response
ç CALL·/MEDIA/VIDEO/XP:unlockSource(<in>)
æ mO·/MEDIA/VIDEO/XP:unlockSource
Example
ç CALL/MEDIA/VIDEO/XP:unlockSource(I2;I4)
æ mO/MEDIA/VIDEO/XP:unlockSource
7.6.14. Muting an Output Port
Command and Response
ç CALL·/MEDIA/VIDEO/XP:muteDestination(<out>)
æ mO·/MEDIA/VIDEO/XP:muteDestination
Example
ç CALL/MEDIA/VIDEO/XP:muteDestination(O1;O2)
æ mO/MEDIA/VIDEO/XP:muteDestination
7.6.15. Unmuting Output
Command and Response
ç CALL·/MEDIA/VIDEO/XP:unmuteDestination(<out>)
æ mO·/MEDIA/VIDEO/XP:unmuteDestination
Example
ç CALL/MEDIA/VIDEO/XP:unmuteDestination(O2)
æ mO/MEDIA/VIDEO/XP:unmuteDestination
7.6.16. Locking an Output Port
Command and Response
ç CALL·/MEDIA/VIDEO/XP:lockDestination(<out>)
æ mO·/MEDIA/VIDEO/XP:lockDestination
Example
ç CALL/MEDIA/VIDEO/XP:lockDestination(O1)
æ mO/MEDIA/VIDEO/XP:lockDestination
HDMI-TPS-TX200series–User'sManual
7.6.17. Unlocking an Output Port
Command and Response
ç CALL·/MEDIA/VIDEO/XP:unlockDestination(<out>)
æ mO·/MEDIA/VIDEO/XP:unlockDestination
Example
ç CALL/MEDIA/VIDEO/XP:unlockDestination(O1)
æ mO/MEDIA/VIDEO/XP:unlockDestination
7.6.18. Querying the Encryption of the Incoming Signal
Thisisaread-onlypropertyshowingifthesignalisencryptedwithHDCP.
Command and Response
ç GET·/MEDIA/VIDEO/<in>.HdcpActive
pr·/MEDIA/VIDEO/<in>.HdcpActive=<HDCP_state>
æ
Parameters
<HDCP_state>
Example
ç GET/MEDIA/VIDEO/I2.HdcpActive
æ pr/MEDIA/VIDEO/I2.HdcpActive=0
7.6.19. Querying the HDCP Setting (Input Port)
HDCPcapabilitycanbeenabled/disabledontheinputports,thus,non-encryptedcontentcanbeseenona
non-HDCPcompliantdisplay.SeemoreinformationintheHDCPManagement
Command and Response
GET·/MEDIA/VIDEO/<in>.HdcpEnable=<HDCP_setting>
ç
pw·/MEDIA/VIDEO/<in>.HdcpEnable=<HDCP_setting>
æ
Parameters
If the
not be present. If the value is 1 (or true)theHDCPisenabled,thus,encryptedcontentcanbereceived.
Example
ç GET/MEDIA/VIDEO/I2.HdcpEnable=1
æ pw/MEDIA/VIDEO/I2.HdcpEnable=true
Appliedfirmwarepackage:v1.3.2b3 | LDCsoftware:v2.5.7b2
Identifier Parameterdescription
The encryption level of the
incomingsignal.
<HDCP_setting> parameter is 0 (or false)theHDCPisdisabledontheport,thus,encryptedcontentwill
#hdcp
Parametervalues
0:thesignalisnotencrypted.
1:thesignalisencryptedwithHDCP.
F: unknown.
section.
90