Query The Timing Mode; Hdcp Setting; Video Stream Settings - Destination (Output) Side; Query The Name Of The Destination - Lightware UBEX Series User Manual

 
     
9. Programmer's Reference 9. Programmer's Reference
9.8.14. Query the Timing Mode
The query returns with the current status of the timing mode. See more details about it in the
section.
ATTENTION!
The timing mode can be changed in the destination stream side (the output ports of the
receiver or transceiver) only. See the related LW3 protocol command in the
Command and Response #timingmode #freerun #sourcelocked
ç GET•/MEDIA/STREAMS/VIDEO/<in>/STREAM.TimingMode
pr•/MEDIA/STREAMS/VIDEO/<in>/STREAM.TimingMode=<timing_mode>
æ
Parameters
The <timing_mode> can be Freerun or SourceLocked.
Example
ç GET /MEDIA/STREAMS/VIDEO/S101/STREAM.TimingMode
æ pr /MEDIA/STREAMS/VIDEO/S101/STREAM.TimingMode=SourceLocked
9.8.15. HDCP Setting
HDCP capability can be enabled/disabled on the input ports, thus, non-encrypted content can be enforced
so that non-HDCP compliant displays can be used. See more information in the
Command and Response #hdcp
SET•/MEDIA/STREAMS/VIDEO/<in>/PORT.HdcpEnable=<logical_value>
ç
pw•/MEDIA/STREAMS/VIDEO/<in>/PORT.HdcpEnable=<logical_value>
æ
Parameters
The <logical_value> can be set to true or false.
Example
ç SET /MEDIA/STREAMS/VIDEO/S101/PORT.HdcpEnable=true
æ pw /MEDIA/STREAMS/VIDEO/S101/PORT.HdcpEnable=true
Applied F-series endpoint firmware package: v1.4.1 | Applied R-series endpoint firmware package: v1.4.1 | Applied MMU firmware package: v1.2.1 | LDC software: v1.34.0b2
UBEX series – Matrix Application Mode – User's Manual UBEX series – Matrix Application Mode – User's Manual
9.9. Video Stream Settings - Destination (Output) Side
Timing Modes
Parameters
Timing Mode Setting section.
9.9.1. Query the Name of the Destination
Command and Response
Example
9.9.2. Setting the Name of the Destination
HDCP Management section.
Command and Response
Example
9.9.3. Query the Tags of the Destination
Command and Response
Example
Parameter Description
<out> Output port of the RX / TRX

INFO: The default name of the output port is the MAC address of the endpoint device and the output port
number separated by a dot. Example: A8:D2:36:F0:00:04.D2
ç GET•/MEDIA/STREAMS/VIDEO/<out>.DestinationName
pw•/MEDIA/STREAMS/VIDEO/<out>.DestinationName=<name>
æ
ç GET /MEDIA/STREAMS/VIDEO/D601.DestinationName
æ pw /MEDIA/STREAMS/VIDEO/D601.DestinationName=Projector_Lobby
SET•/MEDIA/STREAMS/VIDEO/<out>.DestinationName=<name>
ç
pw•/MEDIA/STREAMS/VIDEO/<out>.DestinationName=<name>
æ
ç SET /MEDIA/STREAMS/VIDEO/D702.DestinationName=Theater1
æ pw /MEDIA/STREAMS/VIDEO/D702.DestinationName=Theater1
ç GET•/MEDIA/STREAMS/VIDEO/<out>.Tags
pr•/MEDIA/STREAMS/VIDEO/<out>.Tags=<tag>
æ
ç GET /MEDIA/STREAMS/VIDEO/D102.Tags
æ pr /MEDIA/STREAMS/VIDEO/D102.Tags=movie;4K60;Pretty_Woman
#tag
117 117
Formula
D<logical_device_ID><out_port_nr>