View Installed Board; View Firmware For All Controllers; Restart The Device; Query Health Status - Lightware HDMI-TPS-RX110AY Series User Manual


  
6.LW2Programmers'Reference
6.3.8. View Installed Board
Shows the hardware name and revision of the installed cards.
Command and Response
ȩ {is}
Ȩ (SL#·0·<mb_desc>)CrLf
Ȩ (SL·END)CrLf
Example
ȩ {is}
Ȩ (SL#0HDMI-TPS-RX110AY)
Ȩ (SLEND)
6.3.9. View Firmware for All Controllers
Showsthefirmwareversionsofallinstalledcontrollers.#firmwareversion
Command and Response
ȩ {fc}
Ȩ (CF·<device>·<firmware_version>)CrLf
Ȩ (CF·END)CrLf
Example
ȩ {fc}
Ȩ (CFHDMI-TPS-RX110AY1.4.0b12r74)
Ȩ (CF END)
6.3.10. Restart the Device
The device can be restarted without unplugging power.
Command and Response
ȩ {rst}
Ȩ
Example
ȩ {rst}
Ȩ
HDMI-TPS-RX110AY series – User's Manual
#restart #reboot
Appliedfirmwarepackage:v1.4.0 | LDCsoftware:v2.4.0b3
6.3.11. Query Health Status
Internal voltages and measured temperature values are shown.
Command and Response
ȩ {st}
Ȩ (ST·<health_status>)CrLf
Example
ȩ {st}
Ȩ (STCPU12.18V5.03V3.30V0.01V3.38V1.30V1.86V0.99V0.01V53.67C53.67C)
6.3.12. Restore Factory Default Settings
All settings and parameters are reset to factory default, see the table in the
#factory
Command and Response
ȩ {factory=all}
Ȩ (FACTORYALL...)CrLf
Example
ȩ {factory=all}
Ȩ (FACTORYALL...)
55
#status
Factory Default Settings section.