Properties Windows - Video Layer; Hdmi Input Ports (Tx/Trx Modes); Local Hdmi Output Ports (Tx/Trx Modes) - Lightware UBEX-PRO20-HDMI-F100 User Manual

 
     
6. Lightware Device Controller (LDC) 6. Lightware Device Controller (LDC)
6.5. Properties Windows - Video Layer
6.5.1. HDMI Input Ports (TX/TRX Modes)
Clicking on the HDMI input 1 or 2 port icon results opening the Port properties. The most important signal
information and settings are available on the panel:
Port properties window of the HDMI in 1 (TX)
Available settings and tools:
▪ Port naming;
▪ HDCP setting (Enable / Disable);
▪ Frame Detector;
Reloading factory default settings for the selected port.
▪
series – Extender Application Mode – User's Manual series – Extender Application Mode – User's Manual
#hdcp
Applied F-series endpoint firmware package: v2.0.0 | Applied R-series endpoint firmware package: v2.0.0 | LDC software: v2.5.9b3
6.5.2. Local HDMI Output Ports (TX/TRX Modes)
Clicking on the HDMI output 1 or 2 port icon results in opening the Port properties. The most important
signal and display information and settings are available on the panel:
Port properties window of the HDMI out 1 (TX)
Available settings and tools:
▪ Port naming;
▪ HDCP mode:
– Depends on input: the level and version of HDCP-encryption depends on the source device;
– Maximum possible: the output ports set the maximum HDCP-encryption level which can accept by
the connected sink device.
– Forced HDCP 2.2 Type 1: the output ports always force HDCP 2.2 Type 1. If the sink device supports
this HDCP-encryption level, the signal will be encrypted with HDCP 2.2 Type 0/1. The signal will be
encrypted with HDCP 2.2 Type 1 when the source and the sink either support this HDCP-encryption level.
▪ Power 5V mode (Auto / Always on / Always off);
▪ Frame Detector;
▪ Reloading factory default settings for the selected port.
74 74
#hdcp #power5v