Install And Upgrade; Connecting To A Device (Device Discovery Window) - Lightware DP-OPT-TX150 User Manual


  
4. Software Control - Lightware Device Contoller
4.1. Install and Upgrade
INFO:
After the installation, the Windows and the macOS application has the same look and functionality.
This type of the installer is equal with the Normal install in case of Windows and results in an updateable
version with the same attributes.
Minimum System Requirement
RAM: 1 GB
Minimum display resolution: 1280x720
Installation for Windows OS
Run the installer. If the User Account Control drops a pop-up message click Yes.
During the installation you will be prompted to select the type of the installation: normal and the snapshot
install:
Normal install
Available for Windows and macOS
The installer can update only this instance
Only one updateable instance can exist for all users
Comparison of installation types
ATTENTION!
Using the Normal install as the default choice is highly recommended.
Installation for macOS
Mount the DMG file with double clicking on it and drag the LDC icon over the Applications icon to copy the
program into the Applications folder. If you want to copy the LDC into another location just drag the icon
over the desired folder.

ATTENTION! Please check the firewall settings on the macOS device. LDC needs to be added to the
exeptions of the blocked software for the proper operation.
Upgrading of LDC
Step 1. Run the application.
The Device Discovery window appears automatically and the program checks the available updates on
Lightware's website and opens the update window if the LDC found updates.
The current and the update version number can be seen at the top of the window and they are shown in this
window even with the snapshot install.
The Update window can also be opened by clicking the About icon
Snapshot install
Available for Windows
Cannot be updated
More than one different version can be installed for all users
and the Update button.
?
Applied firmware package: v1.1.13 | LDC software: v2.5.1b5
DP-OPT-TX150, DP-OPT-RX150 – User's Manual
Step 2. Set the desired update setting in the Options section.
▪ If you do not want to check for the updates automatically, uncheck the circle, which contains the green
tick.
▪ If you want to postpone the update, a reminder can be set with different delays from the drop down list.
▪ If the proxy settings traverse the update process, set the proper values then click the OK button.
Step 3. Click the Download update button to start the upgrading.
The updates can be checked manually by clicking the Check now button.
4.2. Connecting to a Device (Device Discovery Window)
There are three tabs for the different type of interfaces: Ethernet, Serial, and USB. Select the USB tab to
connect to the desired extender.
Establishing the Connection
Double click on the device or select it and click on the green Connect button. Please note that if you connect
to the Transmitter directly, it must be in Configuration mode.
The Device Discovery window
17