Properties Windows - Video Layer; Hdmi Input Ports (Tx/Trx Modes); Local Hdmi Output Ports (Tx/Trx Modes); Scaler Panel - Input Side (Tx Mode) - Lightware UBEX-PRO20-HDMI-F110 User Manual

 
     
6. Lightware Device Controller (LDC) 6. Lightware Device Controller (LDC)
6.5. Properties Windows - Video Layer
6.5.1. HDMI Input Ports (TX/TRX Modes)
Clicking on the HDMI input 1 or 2 port icon results opening the Port
properties. The most important signal information and settings are
available on the panel: #hdcp
Port properties window of the HDMI in 1 (TX)
Available settings and tools:
▪ Port naming;
▪ HDCP setting (Enable / Disable);
▪ Frame Detector;
▪ Reloading factory default settings for the selected port.
UBEX series – Extender Application Mode – User's Manual UBEX series – Extender Application Mode – User's Manual
6.5.2. Local HDMI Output Ports (TX/TRX Modes)
Clicking on the HDMI output 1 or 2 port icon results in opening the
Port properties. The most important signal and display information
and settings are available on the panel:
Port properties window of the HDMI out 1 (TX)
Available settings and tools:
▪ Port naming;
▪ HDCP mode (Auto / Always);
▪ Power 5V mode (Auto / Always on / Always off);
▪ Frame Detector;
Reloading factory default settings for the selected port.
▪
Applied F-series endpoint firmware package: v1.4.1 | Applied R-series endpoint firmware package: v1.4.1 | LDC software: v1.34.0b2
6.5.3. Scaler Panel - Input Side (TX Mode)
Clicking on the Scaler panel on the HDMI input 1 of the transmitter
opens the Scaler properties. This feature allows to rescale the
#hdcp #power5v incoming stream to other resolution and refresh rate and fit to the sink
device.
The most important signal and display information and settings are
available on the panel.
Available settings and tools:
▪
▪
▪
▪
▪
▪
▪
#scaler #csc #colorspace
Scaler panel for the HDMI in 1 (TX)
Scaling mode
– Passthrough: the scaler is in pass-through mode.
– Forced resolution: the scaling is active, the selected value
in the forced resolution option will be applied on the video
signal;
Forced resolution: list of the available resolutions with refresh
rate values. The selected one will be applied on the video signal.
See the available resolution in the Resolutions of the Scaler /
FRC section.
Image position (Stretch / Fit / Center)
Color space conversion (No conversion / RGB / YUV 4:4:4 /
YUV 4:2:2);
No Sync Screen (Test Pattern) settings;
Identify Stream / Identify Display button;
Reloading factory default settings for the selected port.
59 59