Properties
Properties
3
3.1 Overview
This product supports ETHERNET-based communication with a lower-level device (such
as a WAGO Power Supply Pro 2 with firmware version 01.04.xx or higher). It functions as
a gateway.
The following protocols are supported:
• EtherNet/IP (Industrial Protocol)
• BootP (pending)
• DHCP
• SNTP
• HTTP(S)
• MQTT
The integrated switch with two external RJ45 ports makes it possible to set up a line
topology without additional infrastructure elements such as switches or hubs.
3.2 View
Position
a
b
c
d
e
f
g
h
12
Product manual | Version: 1.0.0
EtherNet/IP Communication Module
Comment
Locking tab
Ventilation openings
Optical status indication
Reset button
Communication interface
Type label
Marker carrier
ETHERNET port 1 (X5); ETHERNET port 2 (X6)
2789-9023
a
b
c
d
e
f
b
g
h
Figure 1: View
Details
–
–
8 Indicators [} 16]
8 Operating via Reset Button [} 51]
–
8 Type label [} 13]
8 Accessories [} 87]
-