Snmp V3; Table 51: Wbm Page "Snmp V3 - WAGO 750-363/0040-0000 Manual

WAGO-I/O-SYSTEM 750 Configuring via the Web-Based Management System (WBM) 129
750-363/0040-0000 FC EtherNet/IP G4 ECO XTR
9.12.2

SNMP V3

In SNMP version 3, exchanging messages is user-related. Each device, that
knows the passwords set via WBM, may read or write values from the fieldbus
coupler.
In SNMP v3, user data from SNMP messages can also be transmitted in
encoded form. This is why SNMP v3 is often used in safety-related networks.
Via this WBM page "SNMP V3" two independent SNMPV3 users can be defined
and activated (User 1 and User 2).

Table 51: WBM Page "SNMP V3"

SNMP v3 User 1 / 2 Settings
Entry
Enable user
Authentication type
Authentication name Security Name
Authentication key
(min. 8 characters)
Privacy enable
(DES)
Privacy key
(min. 8 characters)
Enable v3
notification/trap
enable
Notification receiver
(IP address)
Value Description
(Example)
Activating user 1 or 2

activate

Deactivating user 1 or 2


None

None
MD5 
None

SHA1

None

Enter the name, if the "Authentication type" MD5 or SHA1
has been selected
Authentification Enter the password with at least 8 characters, if
Key "Authentication type" MD5 or SHA1 has been selected
Activate the DES encryption of the data


Deactivate the DES encryption of the data

Enter the password of at least 8 characters in the
Privacy Key
encryption with DES
Activate the notification traps of the SNMP version 3


Deactivate the notification traps of the SNMP version

3
192.168.1.10 IP address of the notification manager
No encryption of the
MD5  SHA1 
authentication
Encryption of the

MD5 SHA1

authentication with MD5
Encryption of the

MD5 SHA1

authentication with SHA1
Manual
Version 1.0.0