Time Adjustment; Figure 32: Setting The Time Adjustment; Table 35: Setting The Time Adjustment - WAGO -TO-PASS 761 Manual

72 Parameterizing
7.8

Time Adjustment

Select the TO-PASS
Select the entry Acknowledgment under the option Time setting. The buttons
for various settings pertaining to time adjustment are located on the right side.

Figure 32: Setting the time adjustment

Table 35: Setting the time adjustment

Settings
Time adjustment
761-316 TO-PASS® Mobile, 4 AI, Web, MODBUS
®
telecontrol module from the project tree using the identifier.
®
The TO-PASS telecontrol module sends an SMS to itself and
receives the current time from the provider transmitted by
this SMS when the [SMS] button is clicked. Time
adjustment using an SMS takes place only once when the
®
TO-PASS telecontrol module is restarted, or when an SMS
with the text "Time" is received.
When the [Internet] button is clicked, the TO-PASS
telecontrol module takes the time from the response by the
Web portal on each transmission to the Web portal.
The transmission runtimes may cause time differences to
occur.
WAGO-TO-PASS® 761
®
Manual
Version 2.0.0