Figure 1-12 <Ip7Ww-12/24Txh-B1 Tel And Ip7[ ]-8Ipld-C1 Tel - NEC SL2100 Features And Specifications Manual

ISSUE 1.0
• Detail programming of Distinctive Ringing, Tones and Flash Patterns for the multiline terminal, refer
below chart.
4-8 = Melody
PRG15-28-01
PRG15-02-02
PRG22-03-01
Melody 1-5 set Tone Pattern 1-8
in PRG15-28 High-Low (15-02)
Figure 1-12 <IP7WW-12/24TXH-B1 TEL and IP7[ ]-8IPLD-C1 TEL>
Tone pattern 5 to 8 are available.
• The following voice mail features require system tones be changed in PRG 80-01-02 to work. Refer
to the Programming section of the InMail feature for details.
- Call Holding
- Busy Greeting
- Call Screening
- Await Answer Transfer
• When a ring group call rings a Single Line Station, the BLF indication shows busy.
• The priority of the Large LED is as follows:
1. CO Call Ringing
2. Message Waiting Received
3. VM Message Waiting
4. Message Waiting Set
• PRG 15-08 is only effective for Virtual Extensions appearing on a station when the station is set for
patterns 1~3 in PRG 15-02-02. When PRG 15-02-02 for the station is set to patterns 4~8, PRG
15-08 for Virtual Extensions is not used.
Default Settings
Enabled
System Availability
Terminals
All Multiline Terminals
Features and Specifications Manual
1-3 = High, Middle, Low
0 = Trunk Incoming
4-8 = Melody
1-3 = High, Middle, Low
4-8 = Melody
0-3, 9-12 =
Tone Pattern
Melody 1-5 set
in PRG22-03
PRG22-03-01
Melody 1-5 set Tone Pattern 1-8
in PRG15-02 High-Low (15-28)
SL2100
4-8 = Melody
0-3, 9-12 =
Tone Pattern
Melody 1-5 set
in PRG22-03
1-281
D