Marker:alevel <Numeric_Value - Keysight 8990B Programming Manual

MARKer:ALEVel <numeric_value>
This command sets the marker A measurement level.
Prior to sending this command, you need to set the marker measurement mode
NOTE
to DELay or SPACing (refer to
Syntax
Parameter
Item
numeric_value
Keysight 8990B Programming Guide
MARK
:ALEV
Description/Defaul t
A numeric value in % for the marker A measurement level:
– Default value: 50%
– Minimum value: Reference level 1
(refer to "MEASure:THReshold:REFlevel{1|2}
CHAN{1|2|3|4},<numeric_value>"
– Maximum value: Reference level 2
(refer to "MEASure:THReshold:REFlevel{1|2}
CHAN{1|2|3|4},<numeric_value>"
"MARKer:MODE <character_data>"
Space numeric_value
?
on page 265)
on page 265)
MARKer Subsystem
on page 321).
Range of values
Reference level 1 to reference
level 2
11
315