Limit:htype <Character_Data - Keysight 8990B Programming Manual

14 LIMIT Subsystem
LIMIT:HTYPE <character_data>
This command sets the horizontal tolerance type.
Syntax
LIMIT
Parameter
Item
character_data
Example
LIMIT:HTYPE SUNIT
Query
LIMIT:HTYPE?
This query returns the horizontal tolerance type.
Query example
LIMIT:HTYPE?
Reset condition
On reset, the vertical tolerance type is set to DIVision.
410
:HTYPE
Description/Defaul t
Sets the horizontal tolerance type to:
DIVision
SUNIT: Source unit
Space
character_data
This command sets the horizontal tolerance type
to SUNIT.
Queries the horizontal tolerance type.
Range of values
DIVision
SUNIT
Keysight 8990B Programming Guide