Table of Contents
Advertisement
MULTIPULse:TIMEstamp:DISPlay <boolean>
This command enables or disables the multipulse time stamp.
Syntax
Example
MULTIPUL:TIME:DISP ON
Remark
This command is only applicable in the multipulse mode. If this query is sent in
other modes, error –221,"Settings conflict;Required multipulse mode to set this
setting." will occur.
Keysight 8990B Programming Guide
:TIME
MULTIPUL
:DISP
Space
This command displays the multipulse time
stamp.
MULTIPULse Subsystem
0|OFF
1|ON
?
10
293
Advertisement
Table of Contents
