Acquire:ccdf:reference[:State] <Boolean - Keysight 8990B Programming Manual

ACQuire:CCDF:REFerence[:STATe] <boolean>
This command sets the state of the CCDF reference trace.
Syntax
Example
ACQ:CCDF:REF 1
Remarks
– This command is only applicable for channels 1 and 4. If you send this
– This command is only applicable in the CCDF acquisition mode. If the
– This command is only applicable when channel 1 or 4 is connected. If the
Keysight 8990B Programming Guide
ACQ
:CCDF
command for a channel other than 1 or 4, error 700,"Applicable to channel 1
and 4 only" will occur.
acquisition mode is not set to CCDF, error –221,"Settings conflict;Requires
CCDF mode to be enabled" will occur. Refer to
<character_data>" on page 132 to set the acquisition mode.
channel trace is not connected, error –221,"Settings conflict;Requires CCDF
trace # to be enabled" will occur. Refer to
<boolean>" on page 125 to set the CCDF channel trace.
:REF :STAT
This command turns on the CCDF reference trace.
ACQuire Subsystem
Space
"ACQuire:MODE
"ACQuire:CCDF:TRACe{1|4}[:STATe]
4
0|OFF
1|ON
?
111