Channel{2|3}:Probe:id - Keysight 8990B Programming Manual

6 CHANnel Subsystem

CHANnel{2|3}:PROBe:ID?

This query returns the identification of the probe connected to the specified
channel.
Syntax
CHAN
Example
CHAN3:PROB:ID?
Remarks
– This command is only applicable for channels 2 and 3. If a channel other than
– If channel 1 or 4 is not connected, error –241,"Hardware missing; Sensor is not
176
:PROB
2
3
channel 2 or 3 is specified, error 701,"Applicable to channel 2 and 3 only" will
occur.
found in channel <channel>." will occur.
:ID ?
Queries the channel 3 probe identification.
Keysight 8990B Programming Guide