Function{1|2|3|4}:{Source1|Source2} <Character_Data>[,<Numeric_Value>] - Keysight 8990B Programming Manual

12 FUNCtion Subsystem
FUNCtion{1|2|3|4}:{SOURce1|SOURce2}
<character_data>[,<numeric_value>]
This command sets the source for each of the source term. This is an alternative
SCPI command to change the source wihout using SCPI commands with operand.
– Prior to sending this command, you need to set the math function to ADD,
NOTE
– <numeric_value> for this command is an optional parameter, which is used
Syntax
1
FUNC
2
3
4
Parameter
Item Description/Defaul t
character_data Sets the source as:
– CHANnel<n>
– WMEMory<n>
– CONStant
where n = 1, 2, 3, or 4
numeric_value This numeric value is an optional parameter
[a] This is not applicable for averaging.
364
AVERaging, COMMonmode, DIVide, INVert, MAGNify, MULtiply, SQUare,
SQRT, or SUBTract. Refer to the respective commands as listed in
on page 333.
for setting SOURce1 or SOURce2 as CONStant.
Space
:SOUR
:SOUR
character_data
,
Keysight 8990B Programming Guide
"Overview"
numeric_value
?
Range of values
CHANnel<n>
WMEMory<n>
[a]
CONStant