Table of Contents
Advertisement
DISPlay:CLEar [<character_data>]
This command clears the current screen display of the 8990B.
Syntax
Parameter
Item
character_data
Example
DISP:CLE
Remarks
– When the 8990B is running in the continuous acquisition mode, this command
– This command also clears the measurement data, marker information, droop
Reset condition
On reset, the clear display function is set to SCReen.
Keysight 8990B Programming Guide
:CLE
DISP
Description/Defaul t
This is an optional parameter where it sets the clear display
function as:
– SCReen: Clears and resets the current screen display. This is the
default setting.
– ALL: Clears the current screen and measurement data display.
– MEASuretab: Clears the measurement data only.
This command clears the current screen display.
clears the current waveform and redraws it.
measurement data, and waveform averaging if the MEASuretab parameter is
not specified.
Space
character_data
DISPlay Subsystem
Range of values
SCReen
ALL
MEASuretab
16
457
Advertisement
Table of Contents
