Trigger:sweep <Character_Data - Keysight 8990B Programming Manual

TRIGger:SWEep <character_data>
This command sets the trigger sweep mode.
Syntax
Parameter
Item
character_data
Example
TRIG:SWE AUTO
Keysight 8990B Programming Guide
TRIG
:SWE
Description/Defaul t
Sets the trigger sweep mode as:
– AUTO: Sets to the auto sweep mode. This is the default setting.
– TRIGgered: Sets to the triggered sweep mode.
This command sets the trigger sweep to the auto sweep
mode.
Space character_data
?
TRIGger Subsystem
Range of values
AUTO
TRIGgered
8
223