Status:operation - Keysight 8990B Programming Manual

STATus:OPERation

The operation status register set contains conditions which are a part of the
8990B operation as a whole.
The following bits in the register set are used by the 8990B:
Bit Weight/Decimal value
0 to 6 –
7 128
8 256
9 512
10 to 15 –
Bit 7 is set when the trigger is armed and cleared when the trigger is unarmed.
Bit 8 is set when triggering of a waveform occurs and cleared when there is no
waveform triggering.
Bit 9 is set when the ETS operation has completed and cleared when the ETS
operation has not completed.
Syntax
STAT
Keysight 8990B Programming Guide
Definition
Not used
ARM event occurred
TRIGger event occurred
Equivalent-Time Sampling (ETS) operation completed
Not used (bit 15 is always 0)
:OPER
STATus Subsystem 15
443