Xydisplay:ysource <Character_Data - Keysight 8990B Programming Manual

XYDISPlay:YSOURce <character_data>
This command sets the Y-axis source for the XY Display mode. The Y-axis scale
depends on the Y-axis source.
Syntax
XYDISP
Parameter
Item Description/Defaul t
character_data Sets the XY Display Y-axis source as:
– CHANnel<n>
– WMEMory<n>
– FUNCtion{1|2|3|4}
where n = 1, 2, 3, or 7
Example
XYDISP:YSOUR
CHAN2
Remark
This command is only applicable in the XYDISPlay acquisition mode. If the
acquisition mode is not set to XYDISPlay, error –221,"Settings conflict;Requires
XY display mode to be enabled" will occur. Refer to
<character_data>"
Reset condition
On reset, the Y-axis source for the XY Display mode is set to CHAN1.
Keysight 8990B Programming Guide
Space
:YSOUR
This command sets the Y-axis source for the XY Display
mode to channel 2.
on page 132 to set the acquisition mode.
XYDISPlay Subsystem
character_data
"ACQuire:MODE
17
Range of values
CHANnel<n>
WMEMory<n>
FUNCtion
{1|2|3|4}
467