Marker:aslope <Character_Data - Keysight 8990B Programming Manual

MARKer:ASLope <character_data>
This command sets the slope type of marker A.
Prior to sending this command, you need to set the marker measurement mode
NOTE
to DELay or SPACing (refer to
Syntax
Parameter
Item
character_data
Example
MARK:ASL POS
Keysight 8990B Programming Guide
MARK :ASL
Description/Defaul t
Sets the marker A slope type as:
– POSitive: Sets the slope to positive. This is the default setting.
– NEGative: Sets the slope to negative.
"MARKer:MODE <character_data>"
Space character_data
?
This command sets the marker A slope to positive.
MARKer Subsystem
on page 321).
Range of values
POSitive
NEGative
11
297