Table of Contents
Advertisement
4
ACQuire Subsystem
ACQuire:CCDF:MARKer:BXPosition <numeric_value>
This command sets the X-axis position of CCDF marker B.
Syntax
ACQ
Parameter
Item
numeric_value
Example
ACQ:CCDF:MARK:BXP 0.5
Remarks
– This command is only applicable for channels 1 and 4. If you send this
– This command is only applicable in the CCDF acquisition mode. If the
– This command is only applicable when the CCDF marker B source is set. If the
104
:MARK
:CCDF
Description/Defaul t
A numeric value in dB for the X-axis position
command for a channel other than 1 or 4, error 700,"Applicable to channel 1
and 4 only" will occur.
acquisition mode is not set to CCDF, error –221,"Settings conflict;Requires
CCDF mode to be enabled" will occur. Refer to
<character_data>"
on page 132 to set the acquisition mode.
source is not set, error –221,"Settings conflict;CCDF marker B source not set"
will occur. Refer to
"ACQuire:CCDF:MARKer:BSOUrce <character_data>"
page 102 to set the CCDF marker B source.
Space
:BXP
This command sets the X-axis position of CCDF
marker B to 0.5 dB.
"ACQuire:MODE
Keysight 8990B Programming Guide
numeric_value
?
on
Advertisement
Table of Contents
