Limit:upper:level <Numeric_Value - Keysight 8990B Programming Manual

LIMIT:UPper:LEVEL <numeric_value>
This command sets the input level for the limit test. When the waveform exceeds
the upper limit level, it will be displayed in the Limit Test tab in the measurement
view panel or it can be recorded in a .csv file.
From software version 1.2.5.0 onwards, it is recommended to use the LIMIT:V1
NOTE
command to set the input level for the limit test. Refer to
<numeric_value>"
Syntax
Parameter
Item
numeric_value
Example
LIMIT:UPper:LEVEL 1
Query
LIMIT:UPper:LEVEL?
This query returns the current level of the upper limit test. The response format
is <NRf>.
Keysight 8990B Programming Guide
on page 405.
LIMIT :UP
Description/Defaul t
A numeric value for the input level.
The range of values depends on the limit test source.
Space
:LEVEL
This command sets the upper limit level to 1.
LIMIT Subsystem
"LIMIT:V1
numeric_value
?
Range of values
The range of values depends on
the limit test source.
14
395