Table of Contents
Advertisement
10
MULTIPULse Subsystem
MULTIPULse:FRAMe <numeric_value>
This command sets the multipulse frame count.
Syntax
Parameter
Item
numeric_value
Example
MULTIPUL:FRAM 20
Remark
This command is only applicable in the multipulse mode. If this query is sent in
other modes, error –221,"Settings conflict;Required multipulse mode to set this
setting." will occur.
284
:FRAM
MULTIPUL
Description/Defaul t
A numeric value for the multipulse frame count:
– Default value: 1
– Minimum value: 1
– Maximum value: 512
Space
numeric_value
?
This command sets the multipulse frame count to 20.
Range of values
1 to 512
Keysight 8990B Programming Guide
Advertisement
Table of Contents
