Display:connect <Boolean - Keysight 8990B Programming Manual

DISPlay:CONNect <boolean>
This command sets the state of the vectors display mode which draws a line
between consecutive waveform data points when enabled. If the vectors mode is
disabled, the waveform data is displayed as dots.
Syntax
Example
DISP:CONN OFF
Reset condition
On reset, the vectors display mode is enabled.
Query
DISPlay:CONNect?
This query enters a 1 or 0 into the output buffer indicating the state of the vectors
display mode.
– 1 is returned when vectors is turned on
– 0 is returned when vectors is turned off
Query example
DISP:CONN?
Keysight 8990B Programming Guide
DISP :CONN
This command disables the vectors mode and displays the
waveform data as dots.
Queries whether the vectors display mode is turned on or off.
Space
0|OFF
1|ON
?
DISPlay Subsystem 16
453