MEMory:TABle:CLEar
This command clears the contents of the FDO table selected in
"MEMory:TABle:SELect <string>"
The FDO table contents cleared using this command are non-recoverable.
NOTE
Syntax
MEM
Example
MEM:TAB:CLE
Remark
If no FDO table has been selected when sending this command, error
–221,"Settings conflict;No FDO table selected" will occur.
Keysight 8990B Programming Guide
on page 494.
:CLE
:TAB
This command clears the contents of the selected FDO
table.
MEMory Subsystem
19
483