TRIGger:MODE <character_data>
This command sets the trigger mode.
Syntax
Parameter
Item
character_data
Example
TRIG:MODE EDGE
Reset condition
On reset, the trigger mode is set to the edge trigger.
Keysight 8990B Programming Guide
TRIG
:MODE
Description/Defaul t
Sets the trigger mode as:
– EDGE: Sets the 8990B to trigger on edge. This is the default setting.
– EVENt: Sets the 8990B to trigger on event.
– PWIDth: Sets the 8990B to trigger on pulse width.
Space
character_data
?
This command sets the trigger mode to the edge
trigger.
TRIGger Subsystem
Range of values
EDGE
EVENt
PWIDth
8
215