Function{1|2|3|4}:{Vdc|Idc|Pgain} <Character_Data>[,<Numeric_Value>] - Keysight 8990B Programming Manual

12 FUNCtion Subsystem
FUNCtion{1|2|3|4}:{VDC|IDC|PGAIN}
<character_data>[,<numeric_value>]
This command sets the source for each of the source term. This is an alternative
SCPI command to change the source wihout using SCPI commands with operand.
– Prior to sending this command, you need to set the math function to operation
NOTE
– VDC is voltage supplied, IDC is current supplied, and PGAIN is the power gain
– <numeric_value> for this command is an optional parameter, which is used
Syntax
FUNC 1
2
3
4
366
to PAE. Refer to "FUNCtion{1|2|3|4}:PAE <character_data>,<character_data>,
<character_data>,<numeric_value>,<numeric_value>"
for PAE.
for setting VDC, IDC, or PGAIN as CONStant.
Space
:VDC
:IDC
:PGAI
character_data
,
Keysight 8990B Programming Guide
on page 348.
numeric_value
?