System:communicate:lan:dhcpenabled - Keysight 8990B Programming Manual

22 SYSTem Subsystem

SYSTem:COMMunicate:LAN:DHCPenabled

This command enables the Dynamic Host Configuration Protocol (DHCP) for the
8990B. When DHCP is enabled, the 8990B will try to obtain an IP address from a
DHCP server. If a DHCP server is found, it will assign a dynamic IP address, subnet
mask, and default gateway to the 8990B.
Syntax
SYST
Example
SYST:COMM:LAN:DHCP
Remark
DHCP can be disabled by sending
<string>"
Query
SYSTem:COMMunicate:LAN:DHCPenabled?
This query returns the current setting of the Dynamic Host Configuration Protocol
(DHCP) for the 8990B.
Query example
SYST:COMM:LAN:DHCP?
524
:COMM :LAN
This command enables DHCP.
on page 522.
Queries the DHCP setting.
:DHCP
?
"SYSTem:COMMunicate:LAN:ADDRess
Keysight 8990B Programming Guide