Service:bist:tbase[:State] <Boolean - Keysight 8990B Programming Manual

SERVice:BIST:TBASe[:STATe] <boolean>
This command enables or disables a 10 MHz timebase signal to be sent to the
rear panel 10 MHz Ref Out connector for testing purposes.
Syntax
Example
SERV:BIST:TBAS:STAT ON
Reset condition
On reset, the 10 MHz timebase signal is disabled.
Query
SERVice:BIST:TBASe:STATe?
This query enters a 1 or 0 into the output buffer indicating the state of the 10 MHz
timebase testing.
– 1 is returned when the signal is enabled
– 0 is returned when the signal is disabled
Query example
SERV:BIST:TBAS:STAT?
Keysight 8990B Programming Guide
SERV :BIST :TBAS :STAT
This command sends a 10 MHz timebase signal
to the 10 MHz Ref Out connector.
Queries whether the 10 MHz timebase signal is
enabled or disabled.
SERVice Subsystem
Space
0|OFF
1|ON
?
21
511