Table of Contents
Advertisement
4
ACQuire Subsystem
ACQuire:CCDF:MARKer:BYPosition?
This query returns the current Y-axis position setting of CCDF marker B. The
response format is <NRf> in percentage.
Syntax
Example
ACQ:CCDF:MARK:BYP?
Remarks
– This query is only applicable for channels 1 and 4. If you send this query for a
– This query is only applicable in the CCDF acquisition mode. If the acquisition
– This query is only applicable when the CCDF marker B source is set. If the
106
ACQ
:CCDF
channel other than 1 or 4, error 700,"Applicable to channel 1 and 4 only" will
occur.
mode is not set to CCDF, error –221,"Settings conflict;Requires CCDF mode to
be enabled" will occur. Refer to
page 132 to set the acquisition mode.
source is not set, error –221,"Settings conflict;CCDF marker B source not set"
will occur. Refer to
page 102 to set the CCDF marker B source.
:MARK
Queries the Y-axis position setting of CCDF
marker B.
"ACQuire:MODE <character_data>"
"ACQuire:CCDF:MARKer:BSOUrce <character_data>"
:BYP
?
Keysight 8990B Programming Guide
on
on
Advertisement
Table of Contents
