Table of Contents
Advertisement
SERVice:CSOUrce:FREQuency <character_data>
This command sets the frequency of the reference check source.
Syntax
Parameter
Item
character_data
Example
SERV:CSOU:FREQ CS1K
Reset condition
On reset, the reference check source frequency is set to 1 kHz.
Keysight 8990B Programming Guide
:CSOU
SERV
Description/Defaul t
Sets the check source frequency as:
– CS1K: Sets the frequency to 1 kHz. This is the default setting.
– CS50M: Sets the frequency to 50 MHz.
– CS1_05G: Sets the frequency to 1.05 GHz.
Space
:FREQ
This command sets the reference check source
frequency to 1 kHz.
SERVice Subsystem
character_data
?
Range of values
CS1K
CS50M
CS1_05G
21
513
Advertisement
Table of Contents
