Multipulse:acquire:counter - Keysight 8990B Programming Manual

MULTIPULse:ACQuire:COUNTer?

This query returns the current acquired frame number. The maximum number
returned will always be equivalent to the value set using the MULTIPULse:FRAMe
command.
Syntax
MULTIPUL
Example
MULTIPUL:ACQ:COUNT?
Remark
This command is only applicable in the multipulse mode. If this query is sent in
other modes, error –221,"Settings conflict;Required multipulse mode to query this
data" will occur.
Keysight 8990B Programming Guide
:ACQ :COUNT
?
Queries the multipulse acquisition number.
MULTIPULse Subsystem 10
279